Horizontal surfaces like top of windows, ledges should be painted with 3 coats of mayven for greater protection
Application of primer is mandatory
1. As measured through a Ford cup B4.
2. Recoat period is quoted for 25°C and 50% relative humidity, these may vary under different conditions.
3. Some shades may require 3 coats for proper hiding.
Application
Product Code
Thinner
Dilution % (By Volume)
Application viscocity (SEC)
Recoating Period (Hours)
Sand the surface with emery paper 180 and wipe clean
Wall Putty WalTec UNDERCOAT (Optional)
WAUN
WATER
Base on requirement to form paste
PASTE FROM
6 Hours
Exteroir Wall Primer Brush / Roller / Spray
EXPR
WATER
BRUSH 90-110 ROLLER 90-110 SPRAY 40-45
BRUSH 15-18 SPRAY 33
6 Hours
First Coat ExterShield MAYVEN Brush / Roller / Spary
EXAR
WATER
BRUSH 75 ROLLER 75 SPRAY 75
BRUSH 20-25 SPRAY 20-25
4-6 Hours
Second Coat ExterShield MAYVEN Brush / Roller / Spary
EXAR
WATER
BRUSH 75 ROLLER MAX 75 SPRAY 75
BRUSH 20-25 SPRAY 20-25
4-6 Hours
Surya Paints
Higher build for superior hide and coverage
Covers Surface Imperfections
Paint fills in minor cracks and crevices
Resists Peeling (Cracking)
Superior adhesion means the paint lasts for years
Other Paints
Mode coats are required for adequate hide
Cracks and crevices are visible after coating
Poor adhesion leads to peeling and cracking
Kindly refer to the MSDS for EXTERSHIELD MAYVEN which gives detailed information on safety measures while handling the paint.
Do not apply when the ambient temperature is less than 10o C or if the temperature might drop to this level within 4 hrs of application.
Do not over-thin or over-extend the brush.
Do not use Stainers or any other colorants.
Stir well and strain before use.
Tinted paints need thorough shaking immediately after tinter addition as well as before use.
Excessive bird droppings/spitting may affect the performance of the product.
Store the container with the lid tightly closed in an upright position, in a cool, dry place.
Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion, seek immediate medical attention.
Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of clean water and seek medical advice.
In case of skin contact, immediately wash skin with soap and plenty of clean water.
Get medical attention, if irritation develops or persists.
Do not breathe vapor or spray. It is recommended to wear a mask during sanding and surface preparation to avoid dust inhalation.
Do not pour leftover paint down the drain or in water courses.
In the event of spills, contain spillage using sand or earth and dispose of it through an authorized agency for waste management.
No added Lead, Mercury, Arsenic, Chromium & Ammonia compounds.
Left-Over paint disposal:
Left-over paint/drums should not be disposed of in soil/drains. Consumers should consult a local recycling agency for the disposal of paint/drums.
The pails/drums should not be used for storing food items.
For the best performance of the paint, ensure proper washing and cleaning of all algal and fungal growth, if any, at regular intervals of six months.